PS-7000.1 V2 | 7,000 WATT MONOBLOCK CAR AMPLIFIER

**PREORDER** ESTIMATED ARRIVAL DATE APRIL 30th. DELAYS CAN HAPPEN DURING INTERNATIONAL SHIPPING. DO NOT ORDER IF YOU NEED A GUARANTEED ARRIVAL DATE. 

UPDATE 4/16/24: Due to a delay from the previous voyage, the shipping schedule got pushed back a bit. ETA to the ocean port is May 16. From the port, we should have them at our facility ready to ship within a week. 

V2 Changes: 

Introducing Power Surge - Surge Audio's flagship series of high power amplifiers. These models were designed from the ground up, to be anything other than average. PS Series amplifiers feature a military-grade PCB with the most copper tracing possible, added standoffs for extreme vibration resistance, and overbuilt transformers to withstand the heaviest of abuse.

Cooling is key. The PS Series heatsink was custom tooled to optimize cooling capacity. We made use of thermal modeling to determine the best thermal conductivity of our heatsink options. Beyond that, we have spaced the mounting feet 1/4" below the heatsink to allow for additional airflow below the backplate of the amplifier.

All PS Series amplifiers include silver plated Tiffany style RCA inputs, four-stage intelligent protection circuitry, and a remote bass knob with clipping, voltage, and temperature indication. 

Click HERE for PS Series Instruction Manual

Features:

• High Efficiency Class D Monoblock Architecture  
• 0.5 Ohm Stable & Covered Under Warranty
• Subsonic Filter - 24dB Slope
• Low Pass Filter - 24dB Slope
• Bass Boost - 12dB Slope
• Clipping Indicator
• Dual 1/0 Power & Ground Inputs
• Tiffany-Style RCA Inputs
• 4-Stage Protection Circuit
• Wired Remote with Clipping, Voltage, and Temperature Indication 

Specifications:

• RMS Power @ 2 Ohms Strapped: 14,000 Watts (14.4V)
• RMS Power @ 1 Ohm : 7,000 Watts (14.4V)
• RMS Power @ 2 Ohms : 5,000 Watts (14.4V)
• Frequency Response: 10Hz - 250Hz
• Input Sensitivity: 0.2V - 6V
• Signal to noise Ratio: 90dB
• Minimum Impedance: 0.5 Ohm
• Low Pass Filter: 35Hz - 250Hz
• Subsonic Filter: 10Hz - 50Hz
• T.H.D. Continuous @ 4ohm : 0.1%
• Efficiency @ 4 Ohms: 90%
• Operating Voltage : 9V - 16V 
• Recommended Fuse Rating: 800A
• Dimensions: 21.65"L x 9.05"W x 2.56"H