V2 Changes:
Introducing Power Surge - Surge Audio's flagship series of high power amplifiers. These models were designed from the ground up, to be anything other than average. PS Series amplifiers feature a military-grade PCB with the most copper tracing possible, added standoffs for extreme vibration resistance, and overbuilt transformers to withstand the heaviest of abuse.
Cooling is key. The PS Series heatsink was custom tooled to optimize cooling capacity. We made use of thermal modeling to determine the best possible heat dissipation capacity of our heatsink options. Beyond that, we have spaced the mounting feet 1/4" below the heatsink to allow for additional airflow below the backplate of the amplifier.
All PS Series amplifiers include silver plated Tiffany style RCA inputs, four-stage intelligent protection circuitry, and a remote bass knob with clipping, voltage, and temperature indication.
Click HERE for PS Series Instruction Manual
Features:
- High Efficiency Class D Monoblock Architecture
- 0.5 Ohm Stable & Covered Under Warranty
- Subsonic Filter - 24dB Slope
- Low Pass Filter - 24dB Slope
- Bass Boost - 12dB Slope
- Clipping Indicator
- Triple 1/0 Power & Ground Inputs
- Tiffany-Style RCA Inputs
- 4-Stage Protection Circuit
- Wired Remote with Clipping, Voltage, and Temperature Indication
Specifications:
- RMS Power @ 2 Ohms Strapped: 20,000 Watts (14.4V)
- RMS Power @ 1 Ohm : 10,000 Watts (14.4V)
- RMS Power @ 2 Ohms : 7,500 Watts (14.4V)
- Frequency Response: 10Hz - 250Hz
- Input Sensitivity: 0.2V - 6V
- Signal to noise Ratio: 90dB
- Minimum Impedance: 0.5 Ohm
- Low Pass Filter: 35Hz - 250Hz
- Subsonic Filter: 10Hz - 50Hz
- T.H.D. Continuous @ 4ohm : 0.1%
- Efficiency @ 4 Ohms: 90%
- Operating Voltage : 9V - 16V
- Recommended Fuse Rating: 1100A
- Dimensions: 27.56"L x 9.05"W x 2.56"H
Dyno Results:
- Dynamic 0.8 Ohm: 15,885 Watts @ 14.15V
- Certified 1 Ohm: 10,807 Watts @ 13.38V
- Uncertified 1 Ohm: 10,735 Watts @ 13.15V
- Dynamic 1 Ohm: 13,600 Watts @ 14.37V
- Certified 2 Ohm: 7,559 Watts @ 14.23V
- Uncertified 2 Ohm: 7,656 Watts @ 14.11V
- Dynamic 2 Ohm: 7,911 Watts @ 14.55V
- Certified 4 Ohm: 4,562 Watts @ 14.50V
- Uncertified 4 Ohm: 4,610 Watts @ 14.48V
- Dynamic 4 Ohm: 4,506 Watts @ 14.38V
10 Reviews
-
Just wow.
I can't even begin to say enough about this amp. It's beautiful - and the plexiglass back is such a nice touch. The bassknob is lightyears ahead of most amps on the market with the voltage and temperature right there on it! I was surprised to see how Surge managed to squeeze a 10K board into 28", but they did and it performs! You can't get a 10K Korean amplifier for this price ANYWHERE.
